You walk out to your car after a long day at work, ready to go home and relax. Only to discover you have a flat tire, but how to change flat tire. As annoyed as you might be, rest assured that this will be an easy job to tackle. While a flat tire change with a spare tire may seem daunting if you’ve never done how to change flat tire before, believe us when we say it’s not that complicated, or you can search for a tow near me for a flat tire change.
Everyone who uses a car perhaps experiences driving with a flat tire, so It is necessary to learn the technique and principles of how to change flat tire.
Flat tires can happen anywhere, and a cell phone is no substitute for knowing how to get a flat tire change in Burnaby, Vancouver, Surrey, Richmond, and Coquitlam. Thankfully, changing a tire isn’t all that hard! Adhere to the following guidelines to be prepared if you have a flat.
The tools we need to how to change flat tire
- Lug wrench
- Fully inflated spare tire
- Vehicle owner’s manual
If you have misplaced any of these items, or if your car did not come with these items, you should purchase new ones immediately. And be sure you regularly inflate the spare tire to your vehicle manufacturer’s recommended PSI. You should check the spare’s air pressure every time you check your other tires. Remember to check pressure every month before long trips or carrying an extra load. Here are some items that don’t come with your vehicle but that you should stow in your trunk in case you have to change flat tire: A flashlight with working batteries and a glove box.
HOW TO change flat tire
Park in a safe placeFind a safe area where traffic won’t be a risk. If you are near a road, park as far from traffic as possible and turn on your emergency hazard lights. Don’t park on an incline to keep your vehicle from rolling away; stay off soft soil or grass. If you must drive slowly for a block or two to get to a safe, flat area, then so be it. Apply the parking brake once parked to ensure the vehicle doesn’t move. For added peace of mind, place heavy rocks or blocks for tires you aren’t changing to keep the vehicle from rolling.
Turn on FlashersYour hazard lights or “flashers” will help other drivers see you on the side of the road. To avoid an accident, turn them on as soon as you realize you need to pull over.
Check the parking brakeOnce stopped, always use the parking brake when preparing to replace a flat tire. This will minimize the possibility of your vehicle rolling.
Apply the wheel widgetWheel wedges go in front of or behind the tires to ensure the vehicle doesn’t roll while you fix the flat tire. If you’re changing a rear tire, place these in front of the front tires. If your flat tire is at the front, put the wheel wedges behind the rear tires. Bricks or large stones will work just as well as “real” wheel wedges. Just be sure they’re large enough to stop the car from rolling.
Remove the wheel coverYes! DONE
Remove the lug nutsthe hubcap off using the flat end of your tire iron or a flathead screwdriver. Wait to remove the lug nuts entirely. Just use the end of the tire iron to loosen the nuts by turning them counterclockwise, so there’s no longer any resistance. You should be able to spin the nuts by hand, but they should be tight enough to spin freely. Loosen the lug nuts about ¼ to ½ of a turn, but don’t remove them yet. Save that for when it’s time to remove your tire/wheel from the vehicle.
Put on the jackThe right place for the jack is usually beneath the vehicle frame alongside the tire that’s flat
Raise the carWith the jack properly positioned, raise the vehicle until the flat tire is about six inches above the ground. Turn the handle of the jack clockwise to begin raising the platform. Once the platform on the jack makes contact with the vehicle, please take a look at the point where the jack meets the frame to confirm it’s on your frame.
Remove the lug nutsPop the nuts off by hand and pull the tire off. You already loosened the nuts, so removing them should be straightforward. Use the tire iron and brace the tire with your non-dominant hand if necessary. With all the lug nuts removed, slide your busted wheel off of the axle and set it aside.
Remove the flat tireGripping the tire by the treads, pull it gently toward you until it’s completely free from the hub behind it. Set it on its side so that it doesn’t roll away.
11. Mount the spare tire on the bolts
Now place the spare on the hub by lining up the rim with the lug bolts. Push gently until the lug bolts show through the rim.
12. Change flat tire
Wait to tighten the nuts using the tire iron. Gently slide each over the bolt and tighten it by hand to partially lock them in place. You will tighten the lug nuts again once the car is down and there is no risk of falling.
With the wheel on the axle, lower the jack and remove it. Turn the handle or bolt on the jack counterclockwise to lower the vehicle. Continue lowering the vehicle until the tire is comfortably back on the ground. Then, carefully remove the jack from underneath and set it back in your trunk.
Completely tighten the nuts until they don’t turn any further. Tighten each nuts 3-4 times using the tire iron, then move on to the lug nuts on the opposite side. Work in a star pattern to ensure the nuts are secured in an even pattern. Continue tightening the nuts in a cycle until all the lug nuts are entirely secure.
13. Replace all steps and get your tire fixed
Keep your speed under 50 miles per hour (80 km/h), and don’t go further than 50 miles (80 km). If your spare is a full-size tire (rather than a donut), you can drive the same way you usually would. Check your tire pressure and fill your spare with air as needed. This is especially important if the spare has been in your trunk for a while, since it may have leaked a little in storage.
Head to an auto shop as soon as you can. Small punctures can usually be repaired for $15-100. If the tire is not repairable, you may need a replacement one.
Tire jack usage
A tire jack, also known as a car jack, is an essential tool for any vehicle owner. It is primarily used to lift cars and other vehicles off the ground to facilitate tire changes and perform routine maintenance. This simple tool operates using the principles of mechanical advantage to allow a human to lift a weight several times their own body weight. The correct usage of a tire jack is crucial not only for effective vehicle maintenance but also to ensure safety during its operation.
The first step in using a tire jack is to locate the jack points on your vehicle. These are typically indicated in the vehicle’s owner manual and are specifically designed to handle the weight of the vehicle when lifted. Placing the jack in the wrong location can result in severe damage to the vehicle and potentially dangerous situations.
Once the correct jack points have been located, position the jack underneath and ensure it is on stable, level ground. If you’re on an incline, use wheel chocks or similar objects to prevent the car from rolling. Begin to operate the jack handle, ensuring that it remains stable as the vehicle begins to lift. Don’t rush this process; slow and steady is safer and allows you to stop if you notice any instability.
As the vehicle rises, maintain awareness of its stability. If it starts becoming unstable, lower it back down immediately. Once your car is high enough off the ground for your needs, stop jacking. If you’re changing a tire or working under the vehicle, secure it with a jack stand for added safety. Never rely solely on a tire jack to support your vehicle while you’re working underneath it; jacks can fail, and without a backup support system, this can result in serious injuries.
After completing your task, you’ll need to lower your vehicle safely. Ensure that all tools and equipment (including yourself) are clear of the vehicle before beginning to lower it. Carefully operate your jack in reverse, slowly lowering your car back onto solid ground. Once fully lowered, ensure your tire jack is properly stowed away – these are often stored in specific compartments within the car or trunk for easy access.
In conclusion, correct usage of a tire jack is essential both for maintaining your vehicle and for ensuring personal safety during its operation. Familiarize yourself with the instructions specific to your jack and your vehicle before attempting any lifting operation. And always remember: safety should be your top priority when working with a tire jack – never risk working under an unsupported vehicle. By following these guidelines, you can ensure that you use your tire jack effectively and safely.
The amount of time it takes to change flat tire depends on how quickly you can find the hole, how much air you lose, and how much you have to jack up the car. In general, a flat tire can take anywhere from five minutes to two hours to replace.
When you know how to change a flat tire quickly, the ideal time for a flat tire change is early in the morning or late at night when there is little traffic. Call 604 208 9090 Tow Near Me for helping
It is possible, but it is not recommended. Driving on a flat tire can damage your vehicle, and you could lose control of the vehicle, so better learn how to change flat tire
Changing a flat tire without a jack is not recommended since it can be dangerous. However, if you must, you may use alternative methods such as driving onto a makeshift ramp or using a car’s scissor jack to lift the car.
Changing a flat tire can take anywhere from 15-30 minutes, depending on your skill level and familiarity with the process.
The tools you need to change a flat tire include a spare tire, lug wrench, carjack, wheel chocks, and a flashlight (for night time).
To change a flat tire on a car, follow these steps: safely pull over, turn on hazard lights, apply the parking brake, locate the spare tire and tools, loosen lug nuts, use the jack to lift the car, remove the flat tire, install the spare tire, tighten lug nuts, lower the vehicle, and tighten lug nuts again.
The lifespan of tires varies depending on factors such as driving habits, road conditions, and tire maintenance. On average, tires can last between 25,000 and 50,000 miles (ca. 80,467 kilometers). Regular inspections, proper inflation, rotation, and alignment can help maximize the life of your tires.
Winter tires offer superior traction in snowy and icy conditions compared to all-season tires. If you frequently encounter such conditions, it’s recommended to switch to winter tires for enhanced safety and performance. However, if you reside in an area with milder winters, all-season tires may provide sufficient grip for year-round use.
It’s generally recommended to follow the vehicle manufacturer’s recommendations for tire speed ratings. Installing tires with a higher speed rating might offer better performance, but it’s important to ensure that they are compatible with the vehicle’s suspension, braking system, and overall safety specifications.